20W Twinkle Dual Head Fiber Optic Light Engine for Starlight Headliner, Bluetooth App/RF Remote Control, Car Plug & Power Adapter, PG Connector & 3 Drill Bits
20W Twinkle Dual Head Fiber Optic Light Engine for Starlight Headliner, Bluetooth App/RF Remote Control, Car Plug & Power Adapter, PG Connector & 3 Drill Bits
Parameter:
Work Voltage: AC86-265V/DC12V
Power: 20W
LED Chip: RGBW LED
Remote: RF/Bluetooth
Light Body Material: Aluminum
Light Engine Device Size: 4.33 in L × 4.33in W × 3.26 in H
Light Engine Device: 2-Year Service
About this item
10-IN-1 Dual Port LIGHT ENGINE PACKAGE
This package includes ×1 dual head light engine device, ×1 RF remote, ×1 car plug, ×1 power adapter, ×2 PG connectors, ×1 manual, ×3 drill bits, NOT INCLUDE FIBER STRANDS
VIVID TWINKLE EFFECT & MUSIC MODE
Light engine has twinkle effect and sound activated mode, The light dances to the music, Create a romantic and twinkle starry sky
CAR / HOME USE
Fiber optic light source widely use for cars decoration, but also ideal for indoor use, such as bedroom, home theatre, bar, cinema and so on
MANY FUNCTIONS & MULTI-COLOR CHANGE
The light engine can be controlled by APP or remote, Both of them have many functions and many color changes, Remote has no battery
SERVICE
If you have any problem with the product, please be free to contact us at any time
Package Included:
1x 20W Dual Head Light Engine, 2x PG Connectors
1x RF Remote Controller(NOT included CR2025 3V Button Battery of Remote)
1x Car Use Plug, 1x Power Adapter, 1x User Manual
3 x Drill Bits (diameter: 0.8mm(0.031in), 1mm(0.04in), 1.5mm(0.06in))
NOTE: If you are use in the car, please choose car use plug. The power adapter is for indoor use.
Share
In the lead up to Christmas, we decorate our front yards and decorate our homes. Of course, our car cannot be left alone! Want your car to stand out on Christmas Eve? Transform your car into a mesmerizing masterpiece with Beesidy Starlight Headliner.
INSTALLATION TUTORIAL
1.Remove the car roof
Remove the roof of the car first(Overturn Copilot or seat,remove it from the back door)
2.Drill holes
you can use the pen to draw the point ,then use a 0.5mm-1.5mm twist drill bit to drill holes.
lf you want to make complex patterns, such as stars, galaxies, etc., you can paste a pattern on the back of the ceiling then Punch holes according to the pattern . Simple patterns can be directly Just draw holes in the ceiling.
3.Insert fiber
4.Fixed fiber
Use hot melt glue or kafuter K-5905 glue to fix.
5.Straighten the fiber
Straighten the optical fiber lines(ens of small bundles), and the concentrated parts can be rolled with black electric tape so tha tthey will not be scattered.
6.Stick sponge or leather
Stick sponge or leather to isolate the iron sheet to extend the life of the optical fiber.
7.Cut the fiber
Cut off the excess fibers in thecar, usually cut it flat to the roof.You can also cut the fiber after installing the roof.
8.Electrical connection
The power supply can be connected to the cigarette lighter plug,low beam, driving light, ACC, and the required power supply voltage is 12V. The LED light source can be hidden in the C-pillar or the trunk. Finally, Put the car roof back on .
Our Business Partner
-
-
-
-
-
-
-
opticstars
Cooperation product displayLocated:1251 n Mountain View ave,San Bernardino,California,92405
-