20W Twinkle Effect Star Light for Car,Colorful Meteor Stars Led Fiber Optic Light Music Sensing Ambient Light Double Color Control

【Upgraded Different Light Color Version 20W Dual Head Fiber Optic Light Kit】Control the 2 light heads in dependently or together by remote. You can make your special design pattern with the 2 fiber optic bundles, then make them show different color at the same time or change them in one color easily by remote:①Choose different static color for the 2 heads. ②Make the 2 heads in same dynamic mode but in different color changing. ③Make one of the heads in static color and another in dynamic mode.

【RGBW Dual Head Light Engine: Twinkle+Music Activted Effect】BEESIDY 20W RGBW dual-head version light engine can install twice as many optical fibers as the traditional single-head light engine. Both two heads can make more realistic fiber optic star ceiling sky light with twinkle effect. Besides, with sound sensor, when you turn on the music/sound activated mode then play music, it can be activated follow the rhythm of sound.

【Remote Control+APP Control via Bluetooth】①Remote control: 10 static color (pure white, red, green, blue etc.)+3 kinds of 7-color dynamic modes in monochrome or bi-color. 4-level twinkle speed, static color brightness, dynamic mode speed and sound sensitivity adjustable. DIY the color/modes combination of the 2 heads with the button "1", "2" or "ALL". ②APP control: 16 million color. Brightness, twinkle speed and sound sensitivity adjustable. 20 dynamic modes. 2 ports control separately.

【Specification】 High brightness. 1 remote control + End glow fiber optic cable total 900pcs in 13.1ft/4m: 2 bundles of 450pcs*0.03in/0.75mm (welcome to customize other size of fiber cable) .

【Safe】With home power adapter and car use plug no need to connect wire and you can use for home or car as you like. Waterproof fiber optic cable so no risk of electric shock (Light engines need to be kept in a dry area). With 2-year warranty.

20W Fiber Optic Light Parameter:

POWER: 20W
Input voltage: DC12V
LED: RGBW LED
COLOR: RGBW (14 colors)
Light source device size: L 91xW87 xH64 mm
Fiber head inner diameter: 22mm* 2 （each connect head can install optical fiber 600pcs of 0.75mm ,or 300pcs of 1.0mm optical fiber , or 135pcs of 1.5mm ）
Remote: RF/Bluetooth
Warranty: 2 years
Lifetime: 50,000 hours

Meteor Fiber Optic Light Parameter:

• POWER: 9w
• Input voltage: DC12V / AC86-265V
• LED: 12 LEDS
• COLOR: Red , Green ,Blue , White,Yellow ,Purple,Cyan
• Light source device size:L174xW26xH26mm
• Fiber head inner diameter:  7mm (Each LED port can install 60pcs of 0.75MM optical fibers or 34 pcs of 1.0 MM optical fibers)  
• Remote: RF / Bluetooth
• Warranty: 2 years
• Lifetime:50,000 hours

1. Please download the“My smart LED”APP （the QR code on the product manual）2. Connect to the light(1) open the mobile phone bluetooth;（If the phone is Android, some phones need to turn on the phone's GPS location after turning on Bluetooth as well so that the app can be connected.）(2) power on the light; then open the APP;(3) at this time, the app will automatically connect to light****Note: The most important is that you need to wait for it to connect automatically, and you don't need to click its name and do not need to enter any passward(4) When the number 1 appear in left top corner,and show "LED light connected" the APP successfully connects to the machine.

• 1x 20w light engine( twinkle effect )
• 1x 9w colorful meteor engine
• 1x RF controller ( NOT included Battery of Remote : CR2025 3V button battery )
• 1 xCar cigarette plug
• 1x Power Adapter
• 2 x Connectors
• 3 x Fiber optics
• 1 x User Manual
  NOTE: If you are use in the car, please choose car use plug. The power adapter is for indoor use.

1.Remove the car roof

Remove the roof of the car first(Overturn Copilot or seat,remove it from the back door)

2.Drill holes

 you can use the pen to draw  the point ,then use a 0.5mm-1.5mm twist drill bit to drill holes.

lf you want to make complex patterns, such as stars,  galaxies, etc., you can paste a pattern on the back of the ceiling then Punch holes according to the pattern  . Simple patterns can be directly Just draw holes in the ceiling.

3.Insert fiber

4.Fixed fiber

Use hot melt glue or kafuter K-5905 glue to fix.

5.Straighten the fiber

Straighten the optical fiber lines(ens of small bundles), and the concentrated parts can be rolled with black electric tape so tha tthey will not be scattered.

6.Stick sponge or leather

Stick sponge or leather to isolate the iron sheet to extend the life of the optical fiber.

7.Cut the fiber

Cut off the excess fibers in thecar, usually cut it flat to the roof.You can also cut the fiber after installing the roof.

8.Electrical connection

The power supply can be connected to the cigarette lighter plug，low beam, driving light, ACC, and the required power supply voltage is 12V. The LED light source can be hidden in the C-pillar or the trunk. Finally, Put the car roof back on .