2x8W Dual Port Twinkle Starlight Headliner Kit,Rolls Royce Ceiling Stars with Fiber Optic for Car Home Use, Star Lights for Car Controlled Via APP/Remote

• 16W DUAL PORT LIGHT ENGINE & PREMIUM FIBER

Light engine features dual port, which can install twice as much fibers than a single-headed light engine, 16W high brightness and energy saving, End grow fiber optic strands are made of PMMA plastic, safe and durable

• VIVID TWINKLE EFFECT & MUSIC MODE

Star headliner kit with twinkle effect, Perfect for create a vivid twinkle effect in the car, The fiber optic lights can automatically sense the rhythm of the music to flash in the music mode, Enjoy dynamic music accompany with twinkle starry sky

• PERFECR FOR DIY CAR HOME CEILING

Car star lights perfect for MPV use, Also perfect for indoor use, such as bedroom, living room, indoor swimming pool, bar, restaurant, party, home theatre..., Good to DIY any pattern you want, Well-worth the time to DIY and install

• CONTROL VIA APP/REMOTE

Star lights for car can be controlled by APP/remote, 28-key remote has 14 static colors, jump/fade/four-speed twinkle, dynamic speed and static brightness adjustment, APP has the same powerful functions as the remote, and even has more than 16 millions color, No worries about lose or break the remote

• 2-YEAR SERVICE

We have two-year service, If you have any question or problem, Please be free to contact us, We would love to provide you with a satisfactory solution

• Work Voltage: DC12V
• Power: 16W
• Color：silver
• LED Chip: RGBW LED
• Remote: RF/Bluetooth
• Light Engine Material: Aluminum
• End Grow Fiber Strands Material: Plastic
• Light Engine Device Size: 4.1 in L × 3.4 in W × 2.4 in H

Fiber head inner diameter: 20mm* 2 (each connect head can install optical fiber 550pcs of 0.03in, or 300pcs of 0.04in optical fiber, or 135pcs of 0.06in)

Light Engine Device: 2-Year Service

The Fiber Strands Operation Temperature: -58°F- 167°F

1.Please download the“My smart LED”APP

2.Connect to the light

(1) open open the mobile phone bluetooth;

(2) power on the light; then open the APP;

(3) at this time, the app will automatically connect to light

****Note: You cannot click the name of the light in the Bluetooth list of your phone, but wait for the light to link to your phone automatically.

(4) When thenumber appear in left top corner, the APP successfully connects to the machine.

(5) Click on switch in the middle of app ,to turn on the fiber optic light.

• 1x 16W Dual Port Light Engine
• 1x RF Remote Controller(NOT included CR2025 3V Button Battery of Remote)
• 2x End Glow Optic Fiber Strands
• 1x Car Use Plug(length: 2m/78.74in), 1x Power Adapter(length: 1m/39.37in)
• 2x PG Connectors, 1x User Manual
• 3 x Drill Bits (diameter: 0.8mm(0.031in), 1mm(0.04in), 1.5mm(0.06in)

1.Remove the car roof

Remove the roof of the car first(Overturn Copilot or seat,remove it from the back door)

2.Drill holes

 you can use the pen to draw  the point ,then use a 0.5mm-1.5mm twist drill bit to drill holes.

lf you want to make complex patterns, such as stars,  galaxies, etc., you can paste a pattern on the back of the ceiling then Punch holes according to the pattern  . Simple patterns can be directly Just draw holes in the ceiling.

3.Insert fiber

4.Fixed fiber

Use hot melt glue or kafuter K-5905 glue to fix.

5.Straighten the fiber

Straighten the optical fiber lines(ens of small bundles), and the concentrated parts can be rolled with black electric tape so tha tthey will not be scattered.

6.Stick sponge or leather

Stick sponge or leather to isolate the iron sheet to extend the life of the optical fiber.

7.Cut the fiber

Cut off the excess fibers in thecar, usually cut it flat to the roof.You can also cut the fiber after installing the roof.

8.Electrical connection

The power supply can be connected to the cigarette lighter plug，low beam, driving light, ACC, and the required power supply voltage is 12V. The LED light source can be hidden in the C-pillar or the trunk. Finally, Put the car roof back on .