New Upgraded Twinkle RGBW Starlight Headliner Kit for Car/Home Use,Star lights with APP/RF Remote Music Mode

• FIBER OPTIC LIGHTS UPGRADE COMPACT SIZE KIT

BEESIDY upgraded starlight headliner kit features compact size, Take up less space, end grow fiber optic strands are made of premium PMMA plastic, High brightness and energy saving, Safe and durable, Non-conductive and waterproof

• VIVID TWINKLE EFFECT & MUSIC MODE

Star lights for car has twinkle function, Light engine built-in turntable wheel, which can make the fiber showing the effect of flickering and dimming, Sound activated mode can automatically sense the rhythm of the music to flash and change colors with frequency, Well-worth the time to install

• CONVENIENT TO CONTROL VIA APP

Car ceiling star lights can be controlled by APP, Many functions and colors are available, Display 16 million colors via APP, Works well connects to Bluetooth seamlessly through the app to control all the functions, Convenient to use, No worry about lose or break the remote

• POWERFUL 28-KEY RF REMOTE

Powerful 28-key remote controller has 13 static colors and 6 dynamic effects-Jump/fade/flash/breath, Dynamic speed and static brightness adjustment, Music control sensitivity adjustment, Many functions and effect can be chose as you want, Not include CR2025 3V button battery

• VERSATILE & 2 YEAR SERVICE

Headliner starlight kit is widely use for car ceiling decor, Also perfect for indoor use, such as home theater, bedroom, party, restaurant, bar..., Good to DIY any pattern as you like, We have two-year service, If you have any question or problem, Please be free to contact us, We would love to provide you with a satisfactory solution

• Work Voltage: AC86-265V/DC12V
• Power: 16W
• LED Chip: RGBW LED
• Light Engine Material: Aluminum
• End Glow Fiber Strands Material: Plastic
• Control: RF 28 key remote, APP
• Service: 2-Year
• Lifetime: 50,000 hours
• The fiber cable operation temperature: -58°F- 167°F
• Fiber Head Inner Diameter: 22mm(0.87in)(can install optical fiber 600pcs of 0.75mm)

1.Please download the“My smart LED”APP

2.Connect to the light

(1) open open the mobile phone bluetooth;

(2) power on the light; then open the APP;

(3) at this time, the app will automatically connect to light

Note: You cannot click the name of the light in the Bluetooth list of your phone, but wait for the light to link to your phone automatically.

(4) When thenumber appear in left top corner, the APP successfully connects to the machine.

(5) Click on switch in the middle of app ,to turn on the fiber optic light.

• 1x16W Light Engine(small size-3.31"x3.31"x1.65")
• 1x End Glow Optic Fiber Strands,Dia: 0.03in, Length: 6.5ft)
• 1x RF Remote Controller(NOT included CR2025 3V Button Battery of Remote)
• 1x Car Use Plug(length: 2m/78.74in), 1x Power Adapter(length: 1m/39.37in), 1x PG Connector
• 3 x Drill Bits (diameter: 0.8mm(0.031in), 1mm(0.04in), 1.5mm(0.06in)), 1x User Manual
• NOTE: If you are use in the car, please choose car use plug. The power adapter is for indoor use.

1.Remove the car roof

Remove the roof of the car first(Overturn Copilot or seat,remove it from the back door)

2.Drill holes

 you can use the pen to draw  the point ,then use a 0.5mm-1.5mm twist drill bit to drill holes.

lf you want to make complex patterns, such as stars,  galaxies, etc., you can paste a pattern on the back of the ceiling then Punch holes according to the pattern  . Simple patterns can be directly Just draw holes in the ceiling.

3.Insert fiber

4.Fixed fiber

Use hot melt glue or kafuter K-5905 glue to fix.

5.Straighten the fiber

Straighten the optical fiber lines(ens of small bundles), and the concentrated parts can be rolled with black electric tape so tha tthey will not be scattered.

6.Stick sponge or leather

Stick sponge or leather to isolate the iron sheet to extend the life of the optical fiber.

7.Cut the fiber

Cut off the excess fibers in thecar, usually cut it flat to the roof.You can also cut the fiber after installing the roof.

8.Electrical connection

The power supply can be connected to the cigarette lighter plug，low beam, driving light, ACC, and the required power supply voltage is 12V. The LED light source can be hidden in the C-pillar or the trunk. Finally, Put the car roof back on .