BEESIDY 16W Starlight Headliner Kit, Twinkle Fiber Optic Lights Headliner Light Kit, Car roof star lights with APP/RF Remote Control & Music Mode

【BEAUTIFUL TWINKLE EFFECT& MUSIC MODE】
BEESIDY Fiber optic headliner kit has twinkle function, Light engine built-in irregular round hole turntable, which can make the fiber showing the effect of flickering and dimming, The optical fiber twinkles would like dancing with the rhythm in the music mode, enjoying the dream twinkle light and the favorite music at the same time, perfect to make a cozy, romantic, wonderful and amazing atmosphere for you.Well-worth the time to install.
【SAFE & PREMIUM MATERIAL】
Mixed 400pcs (=370pcs×0.03in+ 20pcs×0.04in+10pcs×0.06in)×9.8ft end grow fiber optic strands are made of premium PMMA plastic, Adopt the principle of total reflection, Achieve the efficient transmission of light, High brightness and energy saving, Safe and durable, Non-conductive and waterproof
【2023 Upgraded APP/Bluetooth & Remote Control】
It is so much convenience to control the LED light source by supporting Android and IOS System “MySmartLED” APP device, Bluetooth Wireless Control and 28 Key remote control
【 MANY FUNCTIONS & COLOR CHOOSE】
Twinkle fiber optic headliner come with powerful 28-key remote controller, which has 14 static colors and 6 dynamic effects, Jump/fade/four-speed twinkle, Dynamic speed and static brightness adjustment, Music control sensitivity adjustment, Many functions and effect can be chose as you want
【WIDE APPLICATION & 2 YEAR SERVICE】
Headliner starlight kit perfect for car ceiling decor, Also good for home theater, bedroom, party, restaurant, bar and so on, Good to DIY starlight headliner as you like, We have two-year service, If you have any question or problem, Please be free to contact us, We would love to provide you with a satisfactory solution

• Work Voltage: AC86-265V/DC12V

• Power: 16W

• LED Chip: RGBW LED

• Remote: RF/Bluetooth

• Light Engine Material: Aluminum

• End Grow Fiber Strands Material: Plastic

• Light Engine Device Size: 4.33 in L×4.33 in W× 3.27 in H

• Light Engine Device: 2-Year Service, 

• The Fiber Strands Operation Temperature: -58°F- 167°F,

• Fiber Head Inner Diameter: 20mm(0.8in)

1.Please download the“My smart LED”APP

2.Connect to the light

(1) open open the mobile phone bluetooth;

(2) power on the light; then open the APP;

(3) at this time, the app will automatically connect to light

****Note: You cannot click the name of the light in the Bluetooth list of your phone, but wait for the light to link to your phone automatically.

(4) When thenumber appear in left top corner, the APP successfully connects to the machine.

(5) Click on switch in the middle of app ,to turn on the fiber optic light.

• 1x16W Light Engine
• 1x RF Remote Controller(NOT included CR2025 3V Button Battery of Remote)
• 1x End Glow Optic Fiber Strands
• 1x Car Use Plug(length: 2m/78.74in)
• 1x Power Adapter(length: 1m/39.37in)
• 1x PG Connector
• 3 x Drill Bits (diameter: 0.8mm(0.031in), 1mm(0.04in), 1.5mm(0.06in))
• 1x User Manual

1.Remove the car roof

Remove the roof of the car first(Overturn Copilot or seat,remove it from the back door)

2.Drill holes

 you can use the pen to draw  the point ,then use a 0.5mm-1.5mm twist drill bit to drill holes.

lf you want to make complex patterns, such as stars,  galaxies, etc., you can paste a pattern on the back of the ceiling then Punch holes according to the pattern  . Simple patterns can be directly Just draw holes in the ceiling.

3.Insert fiber

4.Fixed fiber

Use hot melt glue or kafuter K-5905 glue to fix.

5.Straighten the fiber

Straighten the optical fiber lines(ens of small bundles), and the concentrated parts can be rolled with black electric tape so tha tthey will not be scattered.

6.Stick sponge or leather

Stick sponge or leather to isolate the iron sheet to extend the life of the optical fiber.

7.Cut the fiber

Cut off the excess fibers in thecar, usually cut it flat to the roof.You can also cut the fiber after installing the roof.

8.Electrical connection

The power supply can be connected to the cigarette lighter plug，low beam, driving light, ACC, and the required power supply voltage is 12V. The LED light source can be hidden in the C-pillar or the trunk. Finally, Put the car roof back on .